Second, installation and debugging
1, the baking ovens, without lifting structure handling, mobile, loading and unloading all use forklift, from the bottom up a fork. Should be in good ventilation, air dry room, the elevation 2000 meters, no more than around no corrosion of gas and dust, the environment temperature 5-40 ℃, relative humidity must not be more than 65%, and want to install platoon fan, discharge waste gas
2, the oven on both sides of the left from the wall should be about 500 mm, right from the wall should be 800 mm above, shall not pile up around flammable and explosive substances.
3, electric oven power into line to install before 150 (A) amp, connect the power supply air switch wire section area should be the sectional not less than 16 square millimeter of rubber wire set more than copper-core, shell to reliable grounding. The power supply voltage may not have large fluctuations.
4, waste gas emissions to the discharge of gases connected to the outside, in the pipeline to link with metal pipe to avoid accidents.
5, all ready to have the correct sequence, check on trial, close the switch, first press "always stop (a)" switch, and press down the power button on the control board, the corresponding indicator, and then starting, then respectively operation panel of buttons and switch on relevant for the corresponding operation, when need emergency stop or long-term out of service, please press the abrupt stop button can be emergency stop.
6 before operation, the setting: each instrument switch after electrify to set up. Turn the knob electronic temperature controllers set, the working temperature, time to adjust to the instrument of the green light to cake, for example, a temperature of about 180 ℃, electronic timer for the time setting for 30 minutes.
7 and closed door, press the start switch and the clockwise turn drum wind switch, electric heater, and start heating furnace heated air supply. First installed after the start, attention should be paid to see after the blower rotation direction and out the size of the air, roast the car to a clockwise turn, the air is larger, and should be the air volume small, if long time reverse rotation, chassis furnace experience severe fever, heating furnace is slow, long time will be destroyed, the machine will please pay close attention to the user. A reversal, or against the wind will only when the three phase power line of arbitrary two exchange connection over only.
When hot air taxiing, electronic temperature control instrument furnace temperature display started, when the temperature rise to temperature control instrument on the set value, heater automatically stop heating, (combustion machine stop work) when furnace temperature below the setting, heater and will be automatically enabled barriers to oven heated, so the temperature constant circulation, in value. Specific baking temperature by the baked food to decide.
8, when the temperature reached the set value, then open the door, the door with automatic interlocking function, in the open door, drum wind and heating stop immediately, and at the same time frame, only to stop rotating also shut door to normal starting heating. The already cheng fang good pan cart type grill, a hook type in pushing charging the oven shall be baked car pushed off, push the lower top hook positioning clip, (turn disc without hook, directly will push on the merry-go-round, roast car can) sure grill already in place, with correct closed door, turn rotary switches can be baked food.
9, in the roasting process, open "lighting" switch, can be seen clearly the baking process. (note: don't need to look at, please turn off the light, so that can prolong the service life of the floodlight.)
10 and the uniformity of air conditioning is a do work, the correctness of the adjustment will directly affect the color of baked goods and quality, should pass DuoCi adjust to achieve the ideal effect. The adjustment of the specific methods: the size of the outlet according to the colour and lustre of the food on the adjustment. The high temperature, such as the upper grill food color deep, at this time the outlet shall be on the adjustment plate to close, use among with reduced the outlet air away up, up, down, six of the boards, according to the baked food the colour and lustre of fine adjustment can get on the ideal effect.
11, the oven with a wet function, when installation should be on the top of the furnace in water inlet in again. When the baked food need to add wet when baking, click on the control panel humidifying button, this time the inlet valve automatically open to spray water by hot air furnace, formed from the outlet, evaporation moisture, make the furnace blew out maintain humidity. Humidity by users according to the size of the wet switch with the length of time ordered.
猜忌，猜疑，疑心，疑忌，疑惑，质疑，可疑
内容全部来源于网络收集，如有侵权，请联系网站删除：QQ：24596024